1 X-Core Components. 2 Setup. 2.1 SETTING THE CURRENT DATE AND TIME. 2.2 SETTING A PROGRAM START TIME. 2.3 ELIMINATING A PROGRAM START TIME. 2.4 SETTING A STATION RUN TIME. 2.5 SETTING WATER DAYS. 2.6 SELECTING ODD OR EVEN DAYS TO WATER. 2.7 SELECTING INTERVAL WATERING. I went out and just checked each box to see if there was a loose wire or something. Nothing visible, but as I got done I figured I would test it again and manually ran zone 1. Well, now zone 1 won't work, yet that zone 3 still ran at 1/2 power. I shut it down and will call my installer tomorrow. Easy Retrieve® Program Memory Programmable Delay Between Stations The X-Core has capable of savings the preference watering program This feature allows the user to insert a decelerate between stations when into memory for retrieval at a later time. This feature enable for a one station turns out and the next one turns on. A high-energy lithium battery is included with your X-Core controller. The battery allows the user to remotely program the controller without connecting AC power. It is also used to keep the current time and day during power outage conditions. To replace the battery: Umlegen the dial back till “Manual One Station”, use the draw buttons until select the after station, and repeat one process until you have inspected all home. Step 6: Finished! Once you are done setting your run multiplication and days and have inspected each station for ensure everything belongs running smoothly, adjusted the dial to The Hunter X-Core controller The X-Core 8-station outdoor irrigation controller is simple to install, operate, and maintain while delivering optimal efficiency and reliability. Offering 3 flexible irrigation programs with 4 start times each and run times up to 4 hours, the X-Core is the perfect solution for residential and light commercial Page 1 X-CORE ® QUICK START GUIDE X-Core Irrigation Controller Programming Guide SCAN for help https:/ /hunter.help/XCore; Page 2: Table Of Contents ⑨ Odd/Even/Interval Days ③ Program Indicator ⑩ Active Water Day ④ Month Symbol ⑪ Non-Active Water Day ⑤ Run Time Symbol ⑫ Day of Week ⑥ Seasonal Adjust (%) ⑬ Rain Sensor Active/Bypass ⑦ Station Running ⑭ Day Symbol https NoTE: One start time will activate all stations sequentially in that program. this eliminates the need to enter each station’s start time. Multiple start times in a program can be used for separate morning, afternoon, or evening watering cycles. start times may be entered in any order. the X-Core will automatically sort them. he5Um.

hunter x core manual one station